Technical Program
Filter by Type:
12:00 AM

Student Posters: Proppant Dynamics and Conductivity Optimization

Exhibit Hall E, Booth 121
Session Chairs: Katerina Yared, David Hume
2:30 PM Experimental Investigation and Predictive Modeling of Conductivity in Discretely Propped Fractures
2:30 PM Optimization of Proppant Size Combination Considering Fracture Conductivity and Fluid Distribution During Re-Fracturing of Shale Oil Reservoirs
2:30 PM Mechanistic and Experimental Evaluation of Proppant Entry Efficiency in Ultra-Deep Fractured Tight Sandstone Reservoirs — Implications for Conductivity Retention and Formation Damage Control
2:30 PM Impact of Proppant Placement Morphology on Fracture Conductivity and Flow Capacity — Experimental and Modeling Insights for Non-Ideal Proppant Distribution
2:30 PM Optimization of Proppant Size Combination Considering Fracture Conductivity and Fluid Distribution in Shale Oil Reservoirs
2:30 PM Linking 3D Fracture-Surface Morphology to Conductivity Retention — An Upscaling Approach with Implications for Damage Evaluation
2:30 PM Interwell Interference Identification for Multi-Layer Shale Development Using Multi-Source Data and LSTM-Based Dynamic Indices

Opening Plenary Session: Shale at the Crossroads: Technology, Strategy, and the Next Chapter for Unconventionals

372
8:15 AM Speaker
8:15 AM Speaker
8:15 AM Speaker

Panel Session: Theme 9: Lithium and Critical Mineral Extraction: Where is it Heading?

Exhibit Hall E, Room 2
Moderator: Moderator Selin Erzeybek Balan
1:30 PM Panelist
1:30 PM Panelist
1:30 PM Panelist

Panel Session: Inventory and Capital Allocation

Exhibit Hall E, Room 6
Moderator: Moderator Sean Kimiagar
3:20 PM Panelist
3:20 PM Panelist
3:20 PM Panelist

Special Session: Collaboration Success Stories: How Collaborations Build Technology That Shape Our Industry

Exhibit Hall E, Room 6
1:30 PM Speaker
1:30 PM Speaker
1:30 PM Speaker
1:30 PM Speaker

Panel Session: Physics-Informed Machine Learning (PIML) — Bridging Physics, Data, and Digital Adoption in Unconventional Reservoirs

Exhibit Hall E, Room 6
Moderator: Moderator Utkarsh Sinha
10:45 AM Panelist
10:45 AM Panelist
10:45 AM Panelist
10:45 AM Panelist

Student Posters- Fracture Mechanics, Modeling and Propagation

Exhibit Hall E, Booth 121
Session Chairs: Katerina Yared, Hosein Kalaei, David Hume
10:00 AM Efficient Simulation of Heterogeneous Hydraulic Fracture Closure Using a Fast Multipole Accelerated Iterative Scheme
10:00 AM An Efficient Nonlinear Inversion Method for Hydraulic Fracture Geometric Parameters Based on an Analytical Strain Model: Theory and Field Applications
10:00 AM Mechanisms of Hydraulic Fracture Growth in Highly Laminated Shale Under Multi-layer Development
10:00 AM Comparative Experimental Study of Fracture Propagation in Coal and Tight Sandstone Reservoirs — Implications for Hydraulic Fracturing Design
10:00 AM Modeling of Self-Supported Fracture Permeability Enhancement and Dominant Factors in Shale Gas Hydraulic Fracturing
10:00 AM Mechanisms of Advection-Dominated Tracer Transport in Coupled Hydraulic and Natural Fracture Networks
10:00 AM Development of a 1D Mechanical Earth Model and Fracture Analysis at the HFTS-1 Site, Midland Basin
10:00 AM Physics-Informed Cascade Machine Learning for Geomechanical Property Prediction Using Mineralogy Data: A Case Study in Mississippian Formations

Theme 7: Beyond Traditional Surfactants – Novel Chemical EOR Concepts

Exhibit Hall E, Room 1
Session Chairs: Nabila Lazreg, Han Young Park
10:50 AM The Effects and Importance of Chlorine Dioxide (ClO2) Concentration and Diversion on ClO2 EOR and Restimulation Treatments
11:15 AM Butanone as a Low-Cost Wettability Modifier for Shale Well Treatments
11:40 AM Chelation-Driven Silicate Disruption as a New EOR Mechanism for Tight Shale Reservoirs

Theme 5: Examples of Geochemical Monitoring Integration with Multi-Disciplinary Datasets

Exhibit Hall E, Station 2
Session Chairs: Jason Jweda, Shawn Wright
1:35 PM Cost-Effective Mud-Gas and Cuttings Geochemistry Workflow for Reservoir Connectivity, Geosteering, and Production Allocation
2:00 PM Making the Most of Your Gas Data in Unconventional Plays: Case Studies of Quantitative, Semi-Quantitative Allocation, and Time Lapse Programs
2:25 PM Overcoming the “Survivorship Bias” of Surfactant Use in New Wells' Completions: An Engineered Optimization Application of Nano-Surfactant Use Integrating Reservoir Geochemical Properties

Theme 5: Fluid Geochemical Impacts on Production Performance and Hydrocarbon Recovery

Exhibit Hall E, Station 1
Session Chairs: Alexandra Hakala, Wei Wang, Shaina Kelly
3:25 PM Allocation of Eagle Ford Oil and Y-Grade NGL Mixtures Collected During an EOR Huff-n-Puff Pilot Project
3:50 PM Subsurface Investigation of Permian Ba/Sr Anomalies by Water Geochemistry Surveillance
4:15 PM Coupled Geochemical–Geomechanical Simulation of Fracture Conductivity Degradation in Unconventional Reservoirs: A tNavigator-Based Workflow

Theme 9: Subsurface Chemistry of Critical Minerals

Exhibit Hall E, Room 4
Session Chairs: Luke Fritz, Hadi Nasrabadi
10:50 AM Quantitative Method to Determine Lithium Concentration in Geological Brines Using Nuclear Magnetic Resonance Spectroscopy (NMR)
11:15 AM Review of Critical Minerals for Subsurface Energy Applications
11:40 AM Comparing Geochemistry and Microbial Ecology of Samples Collected from Separators vs. Paired Well-heads in the Permian Basin

Theme 8: Performance Prediction Methods: Physics-Based Models and Data-Driven Forecasting Approaches I

Exhibit Hall E, Room 3
Session Chairs: Yuguang Chen, Alvaro Betancourt, Johan Antonio Daal
10:50 AM Linking PD-SRV to Production: Using Pump-Down Analysis to Forecast Well Performance
11:15 AM Physics-Based RTA Interpretation: Simulation Diagnostics and History-Match Guidelines
11:40 AM Rapid Multi-Resolution Simulation of Coalbed Methane (CBM) and Enhanced CBM (ECBM) Recovery Processes Using Fast Marching Method

Theme 2: Developments in NMR Logging, Interpretation, and Core Analysis I

Exhibit Hall E, Room 4
Session Chairs: Yulia Faulkner, Kanay Jerath
1:35 PM 2D NMR and Pyrolysis to Determine the Residual Fluid Type in Unconventional Source Rock Reservoirs
2:00 PM The Magnetic Resonance T2 Distribution Can Be More Than a Proxy for the Pore Size Distribution. It Can Be a Direct Measure of the Pore Size Distribution
2:25 PM A Novel NMR-Based Framework for Quantifying Gas Transport and Oil Recovery During Ethane and Nitrogen Huff-n-Puff in Organic-Rich Shale Formations

Theme 4: Geomechanics in Production Simulation, Forecasting, and Optimization

Exhibit Hall E, Room 3
Session Chairs: Jiehao Wang, Jonathan Ortiz
3:25 PM Impact of Stress Creep on Well Performance
3:50 PM Early-Time Flowback Diagnostics: Linking Cleanup Efficiency to Well Productivity
4:15 PM Integrated Geomechanics for Optimized Drilling and Completion Design in High-Risk Tier 3 Williston Basin

Theme 1: OXY Special Session: Data‑Driven Development Strategies to Maximize Value in the Delaware Basin

Exhibit Hall E, Room 5
Session Chairs: Nuny D. Rincones, Han Jake Li
10:50 AM An Integrated Development Optimization Study in the Delaware Basin for Thin Sand Reservoirs with Interbedded Carbonates
11:15 AM Sequencing with Consequences: Measuring Inter-Bench Parent-Child Interference in the Delaware Basin
11:40 AM Delaware Case Studies to Understand the Impact of Stage Spacing on Fracture Geometry and Well Performance

Theme 2: Advances in Core Analysis and Rock-Fluid Interaction I

Exhibit Hall E, Station 1
Session Chairs: Parag Bandyopadhyay, Abhijit Mitra
10:50 AM Workflow for the Integrated Approach to Rapid Clay Mineral Speciation from the Combined Bulk XRD and CEC Measurements: Matching Large-Scale and Fine-Scale Data
11:15 AM Evaluating Capillary Displacement Effects in Gas Geostorage and EOR: A Reservoir-Scale Sensitivity Analysis Benchmarked with Experiments
11:40 AM Wettability Alteration During Prolonged Exposure of Tight Sandstones to Boron Crosslinked Hydraulic Fracturing Fluid

Theme 9: Current and Forward Opportunities De-Risking for Hydrogen Storage and Production

Exhibit Hall E, Station 2
Session Chairs: Sandrabh Gautam, Juliette Pearson
3:25 PM Transforming Depleted Unconventional Wells into Distributed Subsurface Hydrogen Storage Vessels
3:50 PM Field-Scale Evaluation of Operational Strategies for Hydrogen Storage in a Heterogeneous Deep Saline Aquifer: Impacts of Cushion Gas, Well Configuration, and Cyclic Operation
4:15 PM A Study of the Underground Hydrogen Storage Potential of the Temblor Formation in San Joaquin Basin, California

Theme 3: Geophysical Methods for Reservoir Characterization: Pore Pressure Prediction, Seismic Inversion, and Fracture Characterization

Exhibit Hall E, Room 1
Session Chairs: Orlando Teran, Emily Guidry
3:25 PM Estimation of Reservoir Properties from Elastic Properties Using Empirical Equations
3:50 PM Fracture Geometry Estimation Using Cross-Well LF-DAS Measurements in Faulted Formations
4:15 PM Higher Mode Amplitude Variation with Azimuth as a Fracture Fluid Indicator: A Pannonian Basin Geothermal Case Study

Theme 6: Subsurface Characterization, Applied Case Studies, and Business Implementation I

Exhibit Hall E, Station 2
Session Chairs: Yongshe Liu, Antonio Lazo
10:45 AM Scalable Machine Learning Deployment for Automated Well Correlation and Model Building in the Permian Basin
11:10 AM Well Spacing Impacts on Water Production in the Permian Basin
11:35 AM Deciphering Organic Matter Accumulation in Lacustrine Shale Systems: Insight From Interpretable Machine Learning Approach

Theme 3: Emerging Geological Evaluations: Integrated Workflows for Prospectivity Assessment and Development Efficiencies I

Exhibit Hall E, Room 1
Session Chairs: Jose Delgado, Aravind Nangarla
1:35 PM Integration of Geologic Mapping and Regional Geochemical Drainage Data for Successful Uinta Basin Development Planning
2:00 PM Building a Permian Basin Regional Petrophysical Geomodel
2:25 PM Comparative Geological Analysis of Mississippian Oil and Gas Resources of the Anadarko Basin (STACK and SCOOP Areas) and the Delaware Basin (Tobosa Sub-Basin)

Theme 1: Decision‑Grade Insights for Unconventional Development: Models and Metrics that Scale

Exhibit Hall E, Room 5
Session Chairs: Gonzalo Garcia, Thomas Johnston
1:35 PM Quantifying Parent–Child Depletion Interference Using a Calibrated Full-Physics Simulation Workflow
2:00 PM Correlation of Acoustically Derived Perforation Efficiency to Early-Time Oil Production Using High-Resolution Surface Pressure Analysis

Theme 6: AI-Driven Hybrid Modeling for Intelligent Drilling, Cementing Operations, and Failure Diagnostics

Exhibit Hall E, Room 2
Session Chairs: Dave Symmons, Zhuoran Li
3:25 PM CFD-Machine Learning Hybrid Modeling for Horizontal Wellbore Temperature Prediction Considering Drillstring Eccentricity
3:50 PM Leveraging Generative AI for integrated Deep Learning Models in Drilling Hazard Predication
4:15 PM Transforming UAE Unconventional Drilling: AI-Enabled Automation Sets a New Standard

Theme 1: Scaling Unconventional Success: Global Case Studies in Appraisal and Early Development

Exhibit Hall E, Room 5
Session Chairs: Matthew Adams, Matthew Poole
3:25 PM Pioneering Integrated Fracture Diagnostics to Derisk the First Multi-Well Pad Unconventional Development in the UAE Shilaif Formation.
3:50 PM Evaluation of a New Unconventional Play in the Northern Flank of the Golfo San Jorge Basin, Argentina

Theme 4: Diagnostics and Monitoring in Hydraulic Fracturing with Geomechanical Models I

Exhibit Hall E, Room 3
Session Chairs: Abdul Muqtadir Khan, Lili Xu
1:35 PM Completion Best Practices: Fracture Diagnostics in Unconventional Resource (UCR) Fracturing – Capabilities, Insights, and Best Practices
2:00 PM Low-Frequency DAS for Cement Quality Monitoring in Horizontal Wells
2:25 PM Characterization of Shearing Deformation from Cross-Well Fiber Strain Measurements: Insights for Casing Deformation

Theme 10: Gas Injection EOR

Exhibit Hall E, Room 2
Session Chairs: Michael Cronin, George Herman
10:50 AM Advancing Gas EOR in Shale: Lessons from a Chevron-Led Permian Basin Pilot
11:40 AM Unlocking Tight Oil Potential: Numerical Validation of Magnesium-Doped Fly Ash Nanoparticle-Enhanced in Supercritical CO2 (scCO2) Foam for Huff-n-Puff EOR in the Middle Bakken

Theme 7: From Molecules to Unconventional Field Simulation

Exhibit Hall E, Room 4
Session Chairs: Selin Erzeybek Balan, Haiwen Zhu, Vincent Artus
3:25 PM Enabling Capillary-Corrected Phase Behavior in Commercial K-Value Compositional Simulators
3:50 PM Application of a Dissipation-Based Continuation Nonlinear Solver for Unconventional Reservoir Simulation
4:15 PM Reconciling the Performance Differences During Primary Production and Enhanced Oil Recovery for Two Collocated Wells Using a Coupled Reservoir Simulator – A Case Study

Theme 7: From Design to Performance: Gas Injection Field Case Studies

Exhibit Hall E, Station 1
Session Chairs: Hosein Kalaei, Ali Habibi
1:35 PM Maximizing Value in a Miscible Gas Huff n Puff Enhanced Oil Recovery Pilot – A Case Study
2:00 PM Integrated Field–Laboratory Evaluation of a Natural Gas Liquids Injection EOR Pilot in the Bakken Formation
2:25 PM Field Evaluation of Natural Gas Liquid (NGL) Injection for Enhanced Oil Recovery in The Bakken Formation
12:00 AM

Student Posters: Sustainability, CO₂ Sequestration, and Advanced Stimulation

Exhibit Hall E, Booth 121
Session Chairs: Katerina Yared, Hosein Kalaei, David Hume
10:00 AM Rate-Dependent Induced Seismicity in CO2 Storage: Bridging Laboratory Experiments and Field-Relevant Models
10:00 AM A Study on CO2 Miscible Displacement Mechanisms and Injection Optimization in Ultra-Low Permeability Reservoirs Using Integrated Core Flooding Experiments and Numerical Simulation
10:00 AM CO2-Foam and Nanofluid Hydraulic Fracturing for Sustainable Unconventional Reservoir Production
10:00 AM 1D Geomechanical Modeling for HPHT Onshore Wells Near a Salt Structure: Impacts on Stress Prediction and Drilling Optimization
10:00 AM Water-Avoidance Stimulation Design in Ultra-Deep Fractured Tight Sandstone Reservoirs — Integration of Water-Control Proppant Experiments and Fracture Simulation
10:00 AM Hydraulic-Fracturing Parameter Optimization in Ultra-Deep Tight Sandstone Reservoirs Based on Coupled Understanding of Fracture-Controlled Reservoirs
10:00 AM Re-Fracturing Parameter Optimization in Ultra-Deep Tight Sandstone Reservoirs Based on Coupled Understanding of Fracture-Controlled Reservoirs

Special Session: Engineering the Future of UAE Unconventionals: Lessons from ADNOC’s Dyab Journey

Exhibit Hall E, Room 6
Session Chairs: Moderator Matthew Poole
8:50 AM Speaker
8:50 AM Speaker
8:50 AM Speaker

Special Session: Beyond Assumed Fracture Geometry: Insights from Fracture Surveillance

Exhibit Hall E, Room 6
Session Chairs: Moderator Jiehao Wang
10:45 AM Integrated Design, Implementation, and Key Insights from the Qincheng Shale Oil Hydraulic Fracturing Test Field
10:45 AM Integrated Design, Implementation, and Key Insights from the Qincheng Shale Oil Hydraulic Fracturing Test Field
10:45 AM Large-Scale Bedding Plane Slippage and Its Impact on Hydraulic Fracturing: Integrated Analysis from Field Observations in the Eagle Ford and Austin Chalk Formations
10:45 AM Decoding the Fracture Flow Puzzle: Tracer-Based Insights from Utah FORGE Reveal Complex Flow-Path Behavior in Hydraulically Fractured System

Theme 3: International and Emerging Challenges of Unconventional Resources

Exhibit Hall E, Room 1
Session Chairs: Andrew Keene, Kelsey Call
8:50 AM Real-Time Acoustic Measurements for Design Evaluation and Optimization in the Vaca Muerta Basin
9:15 AM Delineation of the High Production Potential Areas from Regional to the Well Pad Scale in Unconventional Gas Play in UAE
9:40 AM Geological Insights into Lacustrine Shale Oil and Gas Enrichment and Prospect Evaluation: The Lianggaoshan Formation in Northeastern Sichuan Basin, China

Theme 6: AI-Enhanced Well Planning, and Completion Design and Optimization

Exhibit Hall E, Station 2
Session Chairs: Peyman Moradi, Prithvi Chauhan
8:55 AM From Data to Design: MVA Modeling for Smarter Well Planning in Delaware Basin
9:20 AM High-Resolution Time-Series Machine Learning for Pressure-Based Fracture Diagnostics and Adaptive Completion Design
9:45 AM AI-Driven Fluid and Proppant Optimization for Unconventional Reservoir

Theme 8: Connecting Forecasting with Reservoir Management Decisions

Exhibit Hall E, Station 1
Session Chairs: Autumn Shannon, Hector Barrios, Eric Bryan
10:50 AM Produced Water Management in the Permian Basin to Accommodate the Arid West Texas Region: Historical Production, Forecast, and Water Composition
11:15 AM Making an Impact: Machine-Learning-Ready Metrics for Ultra-Tight Infill Development
11:40 AM Optimization of Multi-Well Productivity Through Production Sharing and Fracture-Driven Interactions: A Numerical Assessment

Theme 2: Emerging Unconventional Plays and Case Studies

Exhibit Hall E, Room 1
Session Chairs: Haijing Wang, Yalda Barzin
10:50 AM Is the Western Haynesville a New Emerging Natural Gas Play in Texas?
11:15 AM Application of Multiple DFIT-FBA Tests to Evaluate Inter-Bench Stress Contrasts, Reservoir Properties and Communication Risk Between Wells
11:40 AM Unveil Gas Potential in Abnormally Low Resistivity Shales by NMR T1-T2 Measurements, Contributing to China's Shale Gas Production Record

Theme 7: When Classical PVT No Longer Applies – Confined Fluid Phase Behavior

Exhibit Hall E, Room 3
Session Chairs: Jiajun He, Sardar Asadov
10:50 AM Molecular Diffusion as a Fundamental Mechanism for Gas/Light Hydrocarbon Enhanced Oil Recovery in Unconventional Shale Reservoirs
11:15 AM Molecular Insights into the Miscible Behavior and Displacement Mechanisms between CO2-CH4/C2H6/C3H8 Gas Mixture and Tight Oil in Nanoslits
11:40 AM Uncovering Confined Fluid Phase Behavior of Unconventional Reservoirs Through Novel Gravimetric Adsorption Experiments

Theme 4: Rock and Hydraulic Fracture Modeling

Exhibit Hall E, Room 4
Session Chairs: Ruiting Wu, Jichao Yin
1:35 PM Stress Space-Driven Completions: An Integrated Geomechanical Framework
2:00 PM In-Situ Geomechanical Properties and Stress Characterization Using a High-Precision Pressuremeter in a Deep Well
2:25 PM Integrated Geomechanical Analysis of Parent-Child Well Interaction and Production Optimization Using SWPM and DAS Monitoring

Theme 1: Scaling Performance at Pace: Digital Workflows, Factory Learnings, and Completion Effectiveness

Exhibit Hall E, Room 5
Session Chairs: Luis Baez, Amr Ramadan
10:50 AM Automating DSU Analysis with Interactive Geo GBV Visualizations for Faster Planning Cycles
11:15 AM Building on Factory-Mode Learnings to Appraise Southern Fortín de Piedra: Integrated Geological Modeling and Pilot Results
11:40 AM Where’s the Proppant? Plug Isolation Impacts on Treatment Uniformity and Implications for Production Performance

Theme 9: Applications Oriented Technologies for Emission Reduction

Exhibit Hall E, Room 5
Session Chairs: Jonathan Ortiz, Abouzar Mirzaei Paiaman
1:35 PM Toward Net-Zero Frac Fleets Using Nanoparticle Based Pulsed-Power Plasma Stimulation
2:00 PM Turning Flared Gas in the Permian Basin into Reserves: Quantifying Associated Gas Losses and Salado Formation Subsurface Storage Potential
2:25 PM Oilless Compression to Capture Gas and Eliminate Flaring

Theme 7: Flow Dynamics at the Pore Scale in Unconventional Reservoirs

Exhibit Hall E, Room 3
Session Chairs: Yula Tang, Jichao Han
3:25 PM Pore-Scale Evaluation of Condensate Dropout Impact on Gas Permeability
3:50 PM Microfluidic Visualization and Phase-Behavior Simulation Study on Gas Injection Displacement Mechanisms in Shale Oil
4:15 PM Multiphase Flow and Oil Mobilization Mechanisms During CO2 Fracturing Flowback in Tight Oil Reservoirs Revealed by MRI and NMR Experiments

Theme 9: Technology Transfer from the Oil and Gas Industry for CCUS Applications

Exhibit Hall E, Room 3
Session Chairs: Scott Singleton, Pouria Mousavi
8:55 AM Study of Simultaneous Hydrogen Gas Stream Purification and CO2 Sequestration in Deep Coal Seams Using the RTAPK Method Applied to an Artificial Coal Plug
9:20 AM Induced Seismicity from CO2 Storage: Occurrence, Prediction, and Mitigation Measures
9:45 AM Hydro-Mechanical Coupling During CO₂ Injection in Entrada Sandstone: Linking Pore-Pressure Diffusion, Fault Dilation, and Acoustic Emission Energy Release

Theme 9: Subsurface Measurement and Control Technologies for Geothermal Efficiency

Exhibit Hall E, Station 1
Session Chairs: Fengyuan Zhang, Saeid Khorsandi
1:35 PM Analytical Solution for Heat Recovery in Enhanced Geothermal Systems (EGS) Including Complex Fracture Geometry
2:00 PM Application of Autonomous Flow Control Devices in Geothermal Systems to Optimise Heat Efficiency

Theme 2: Innovative Logging Measurements and Interpretation Methods

Exhibit Hall E, Station 2
Session Chairs: Sebastian Ramiro-Ramirez, Edgar Ignacio Velez Arteaga
3:25 PM A Case Study Utilizing Advanced Wireline Formation Testing Technology to Characterize Reservoir Fluids in the Permian Basin
3:50 PM Wireline Microfracture Test Implementation and Analysis Using the DFIT-FBA Procedure
4:15 PM Comparative Study of Drill-Bit Images with LWD Hi-Resolution Resistivity Images for Optimal Solutions in U.S. Land Operations

Theme 7: Production Analysis in Unconventional Reservoirs

Exhibit Hall E, Station 1
Session Chairs: Zhenzhen Wang, Leopoldo Matias Ruiz Maraggi
8:55 AM Three-Phase Flowback RTA for Gas Condensate Shale: Quantifying Fracture Skin from Damage
9:20 AM A Novel Multiphase Flowback Rate Transient Analysis Method for CO2 Fractured Wells in Tight Oil Reservoirs
9:45 AM A Simple and Accurate Density-Based Method for Analysis of Production and Bottomhole Pressure Data from Multistage Hydraulically Fractured Horizontal Dry Gas Reservoirs

Theme 6: Data-Driven Optimization and Decision Practices in Oilfields

Exhibit Hall E, Room 4
Session Chairs: Yuxing Ben, Judy Zhu
10:50 AM A Data-Driven Framework Using Feature Space Optimization with Advanced Machine Learning and Explainable AI Methods for Performance Prediction in Multi-Stage Hydraulically Fractured Horizontal Wells.
11:15 AM Automated Geosteering in Shales: Can AI Take Over Real-Time Decisions?
11:40 AM A Meta-Learning Framework for Assessing Key Drivers of Shale Oil Production with Few Shot Samples Across Multiple Basins in China

Theme 2: Developments in NMR Logging, Interpretation, and Core Analysis II

Exhibit Hall E, Room 4
Session Chairs: Jose Dugarte, Giselle Garcia Ferrer
8:55 AM Shale Characterization Using Magnetic Resonance T1-T2* Relaxation Correlation Method
9:20 AM NMR Evaluation of Tight Oil Mobility by Supercritical Carbon Dioxide Displacement
9:45 AM Teaching NMR to Think: AI-Driven Prediction Of NMR T2 Cutoff Values

Theme 7: CO₂ Huff-and-Puff and Cyclic Gas Injection Mechanisms

Exhibit Hall E, Room 3
Session Chairs: Deniz Paker, Rohan Vijapurapu
1:35 PM Enhanced Oil Recovery Effects of Adding Non-Ionic Surfactants During CO₂ Huff-and-Puff
2:00 PM Linking Wettability to CO2 Huff-and-Puff Efficiency: Insights from Facies-Controlled Experiments on Tight Reservoir Cores
2:25 PM Chemical-Assisted CO2-Oil Miscibility Pressure Reduction for Diffusion-Driven Processes in Shales

Theme 2: Geomechanical Integration and Application of AI/ML

Exhibit Hall E, Room 1
Session Chairs: Mehrnoosh Saneifar, Didi Ooi
1:35 PM Geomechanical Behavior of Oil Shales from Northeastern Brazil
2:00 PM Integrated Methodology to Reduce Uncertainties in Selection of Frac Zones in Source Rocks
2:25 PM Automated Basin-Wide Mineralogy Estimation Using Deep Learning Integration of Core, Spectroscopy, and Basic Log Data

Theme 6: Reservoir and Production Forecasting I

Exhibit Hall E, Station 2
Session Chairs: Sebastien Matringe, Rong Lu
1:30 PM Efficient Unconventional Reservoir Simulation via Physics-Informed Fourier Neural Operators
1:55 PM A Novel Model Integrating Physics-Guided Multimodal and Transfer Learning Model for Shale Gas Well EUR Prediction
2:20 PM Assessing the Impact of Prior Depletion on Future Inventory in the Delaware Basin

Theme 4: Geomechanics in Well Design, Construction, and Drilling

Exhibit Hall E, Room 2
Session Chairs: Fatick Nath, Dharmendra Kumar, Yuanbo Lin
8:55 AM Stress Profiling Minimum and Maximum Horizontal Stress in Emerging Tight Gas Horizontal Plays: A Uinta Basin Case Study
9:20 AM Geomechanics Meets Machine Learning: Drilling Risk Prediction for Challenging Infill Wells in Mature Unconventional Play
9:45 AM A Hydromechanical and Strength-Informed Mechanical Specific Energy Model for Real-Time Drilling Optimization

Theme 3: What’s in Your Rock: Geological and Geophysical Integration that Impact Business Decisions and Capital Efficiency

Exhibit Hall E, Room 2
Session Chairs: Marianne Rauch, Ben Roth
10:50 AM Impact of Geologic Facies Variability on Completion Performance in Unconventional Reservoirs: A Review of Published Field and Petrophysical Studies
11:15 AM Investigating Casing Integrity Challenges in UC Wells Induced by Sub-Seismic Geological Features
11:40 AM Identification of Perforation Locations and Estimation of Production Profile in Multistage Hydraulically Fractured Horizontal Wells Using Distributed Temperature Sensing Data

Theme 1: Lowering Operational Uncertainty: Diagnostics and Integration that Improve Completion Outcomes

Exhibit Hall E, Room 5
Session Chairs: Craig L. Cipolla, Annie Shen
8:55 AM A Comparison of Near Field and Far Field Uniformity Metrics in the Alberta Montney
9:20 AM Emerging Visean Unconventional Play within the Dnieper Donets Basin, Eastern Ukraine: Multidisciplinary Approach from Exploration to Pilot Testing

Theme 1: Improving Returns Through Smarter Development Strategy

Exhibit Hall E, Room 5
Session Chairs: Anup Viswanathan, David Haddad
3:25 PM TripleFrac: Scaling Multifrac Hydraulic Fracturing for Operational Efficiency and Cost Reduction
4:15 PM Using Drilling-Derived Mechanical Specific Energy to Map Pore-Pressure Contrasts Across Faulted Eagle Ford Blocks

Theme 9: CCUS Opportunities and Strategies

Exhibit Hall E, Station 2
Session Chairs: Birol Dindoruk, Maria Lozano
10:50 AM 2025 CCUS Play Fundamentals: Gigatonne Dreams, Market Realities
11:15 AM Integration of CO₂-EOR and Carbon Storage for Sustainable Development of Nigeria’s Unconventional Reservoirs
11:40 AM Field-Level Evaluation of U.S. Underground Natural Gas Storage Sites for CO2-Based Cushion Gas Replacement: CO2 Sequestration, Cushion Gas Recovery, and Expanded Working Gas Space

Theme 10: Laboratory Advancement of New Approaches

Exhibit Hall E, Station 1
Session Chairs: Sama Morsy, Deepak Devegowda
3:25 PM Experimental Study of CO2 Huff-n-Puff for Enhanced Oil Recovery in Shale Reservoirs: Mechanistic Insights from Fractures and the Viability of CO2 Energized Huff-n-Puff
3:50 PM Stabilizing In-Situ Combustion in Bakken Shale Using Hydroxide Additives: Evidence of Reduced Oxygen Demand and Enhanced Combustion Uniformity
4:15 PM Unraveling the Complex Interactions Between Biocides and Friction Reducers to Preserve Functionality

Theme 9: Engineering the Next Generation of Geothermal Projects: Models, Methods, and Insights

Exhibit Hall E, Room 1
Session Chairs: Denise Benoit, Kristina Holan
3:25 PM Scoping Engineering and Economic Study of a Geothermal Project
3:50 PM Physics Guided Surrogate Model Framework for Thermal Extraction Prediction in Enhanced Geothermal Systems Under Variable Injection Scenarios
4:15 PM Investigation of Hydraulic Fracture Properties for Geothermal Heat Extraction from Shale Gas Reservoirs Using Embedded Discrete Fracture Modeling

Theme 6: Reservoir and Production Forecasting II

Exhibit Hall E, Room 2
Session Chairs: Vishal Bang, Yuanbo Lin
3:25 PM Artificial Intelligence-Assisted Production Forecasting in Unconventional Reservoirs: A Review of Machine-Learning Methods, Decline Frameworks, and Data-Quality Requirements
3:50 PM Designing Depletion Features for Parent–Child Modeling: Comparing Time, Distance, and Volume–Distance Formulations in Machine-Learning Workflows
4:15 PM Hybrid Data-Driven and Physics Approach for Dynamic BHP Estimation and Well-Performance Tracking in Coal Seam Gas (CSG) Fields

Theme 10: New Ideas to Maximize Field Value

Exhibit Hall E, Room 2
Session Chairs: Robin Singh, Anil Ramkhelawan
1:35 PM Revitalizing Mature Shale Basins: Evaluating Behind-the-Meter Power Generation, Geothermal Conversion, Energy Storage, and Produced Water Valorization Pathways
2:00 PM OCTG Torque vs Tension: A Growing Concern for Well Integrity
2:25 PM Fracturing Sleeve System Striving for Excellence in Unconventional Resource Plays: Present and Future

Theme 8: Diagnostics and Integrated Insights

Exhibit Hall E, Room 4
Session Chairs: Susan Howes, DT Vo, Robert Archer
3:25 PM Multi-Stage Hydraulic Fracture Modeling with Rate Transient Analysis (RTA) and Time-Lapse Geochemistry (TLG) Utilization
3:50 PM Evaluating Depletion Influence Using Analog Surveillance Data, RTA, and Multi-Pad, Multi-Bench Depletion Modeling
4:15 PM Quantifying Key Drivers of Well Performance and Economics in the Haynesville Shale
12:00 AM

Special Session: Agents in the Trenches: Real-World Lessons from Autonomous Subsurface Workflows

Exhibit Hall E, Room 6
10:45 AM Speaker
10:45 AM Speaker
10:45 AM Speaker
10:45 AM Speaker

Special Session: EOR for Shale Plays

Exhibit Hall E, Room 6
Session Chairs: Moderator Doug Valleau
8:50 AM Speaker
8:50 AM Speaker
8:50 AM Speaker

Theme 5: Emerging Geochemical-Based Applications

Exhibit Hall E, Station 2
Session Chairs: Ahmed Alsmaeil, Jennifer Adams, Jagos Radovic
10:50 AM Relationship Between Chemofacies and Mechanical Property: A Permian Basin Example
11:15 AM Pressure-Dependent Chemo-Mechanical Pathways in Mancos Shale Exposed to CO2-Rich Brine
11:40 AM Different Kerogens in the Kitchen – Thermal Maturity Trends of the Mowry Shale Across Southwest Wyoming
12:05 PM Pyrolysis Tmax Suppression as a Robust Indicator for Rapid Identification of Lacustrine Shale Oil “Sweet Spots”

Theme 7: Foam, Mobility Control, and Conformance Management

Exhibit Hall E, Room 3
Session Chairs: Amit Katiyar, Kaveh Ahmadi
8:55 AM Impact of Nanobubble Generation Pressure on Enhanced Oil Recovery
9:20 AM Diverter Stabilized Foams for Temporary Flow Restriction in Parent–Child Fracture Geometries in Unconventional Shale Reservoirs: A Microfluidic Assessment
9:45 AM Foam-Based Mobility Control for Cyclic Gas Injection in High-Temperature, High-Salinity Shale Reservoirs

Theme 7: Surfactant Design, Chemistry, and Transport in Unconventionals

Exhibit Hall E, Room 1
Session Chairs: Chao-yu Vence Sie, Shunxiang Xia
10:50 AM A Surfactant Case Study in the Delaware Basin: Correlating Field Data with Laboratory Performance
11:15 AM Experimental and Numerical Study of Surfactant Huff-and-Puff in Shale Reservoirs
11:40 AM Micelle Behavior of Surfactants in High-Salinity, High-Hardness Brines, and Its Implications for Transport and Stability in Unconventional Reservoirs
12:05 PM Development and Screening of Surfactant-Nanoparticle Package for Unconventional Bakken Reservoirs at 150 °C and ~30%Salinity: Comparison Between Blends of Conventional (Anionic, Nonionic, and Amphoteric), Bio-Based and Bio-Surfactants (Rhamnolipids And Sophorolipids) with Nanoparticles

Theme 10: Refrac Stimulation

Exhibit Hall E, Room 4
Session Chairs: Jonathan Ortiz, Reza Safariforoshani
10:50 AM Physics-Based Refrac Sensitivity and Optimization Using Calibrated Models in the Bakken
11:15 AM Permian Basin Refrac Candidate Selection and Design with Numerical Modeling
11:40 AM Mature Well Re-Fracturing Enabled by Pre-Frac Array Electromagnetic Diagnosis and Well Re-Construction Using Expandable Tubular
12:05 PM Downhole Pulse-Based Hydraulic Re-Stimulation for Revitalizing Mature Unconventional Wells

Theme 2: Advances in Core Analysis and Rock-Fluid Interaction II

Exhibit Hall E, Station 1
Session Chairs: Sabyasachi Dash, Sandeep Mukherjee
10:50 AM Machine Learning for Water Saturation Prediction: Beyond Archie’s Model
11:15 AM Cation Exchange Capacity In Tight Rocks
11:40 AM Evaluating NMR Sensitivity in Tight Reservoir Cores: Impacts of Calibration Volume, Tool Frequency, and Porosity Regime
12:05 PM A Study on Shale Mechanical Parameters Based on Nanoindentation Experiments: A Case Study from the Chang 7 Shale in the Ordos Basin

Theme 2: Integrated Petrophysical Interpretation

Exhibit Hall E, Room 1
Session Chairs: Rishikesh Shetty, Hasan Khan
8:55 AM From Characterized Sweet Spot to Stage Optimization: An Enhanced Integrated Workflow Applied to Major Shale Plays Across Diverse Geological Settings in the Americas, Case Studies
9:20 AM Integrated Formation Evaluation at a Drilling Qualification Facility Using Core and Downhole Sensors
9:45 AM Updated Non-Electrical Solutions for Unlocking Gas Potential In Ultradeep Tight Reservoirs

Theme 4: Diagnostics and Monitoring in Hydraulic Fracturing with Geomechanical Models II

Exhibit Hall E, Room 5
Session Chairs: Qin Ji, Xinghui Liu
8:55 AM Insights into Deformation Styles of Fault Activation from Induced Seismicity
9:20 AM Proppant Distribution Effect on Pressure Transient Behavior in Fractured Production Wells: A Combination of Forward Simulation and Inversed Method Analysis
9:45 AM An Alternative Approach for Estimating Reservoir Pressure from the Flowback Period of DFIT-FBA

Theme 6: Data-Driven Prediction of Well Fracturing and Production Performance

Exhibit Hall E, Room 2
Session Chairs: Utkarsh Sinha, Yue Li, Yuxing Ben
10:50 AM A Data Driven Approach for Early Frac Hit Detection in ESP Wells Within Unconventional Reservoirs
11:15 AM Predicting RTA Parameters for Delaware Basin Unconventional Wells Using Supervised Machine Learning
11:40 AM Physics Informed Machine Learning Frameworks for Improved Prediction of Hydraulic Fracturing Treatment Pressure
12:05 PM Integrating Machine Learning and Physics-Based Modelling to Predict Parent-Child Well Degradation and Quantify Key Drivers in Unconventional Reservoirs

Theme 9: Multiphysics Controls Characterization for CCUS Reliability

Exhibit Hall E, Room 2
Session Chairs: Katrina Ostrowicki, Abouzar Mirzaei Paiaman
8:55 AM Multi-Decadal Evolution of a CO₂-Driven Reaction Interface in Wellbore Cement: Insights from Field-Retrieved Cores
9:20 AM NMR Spectroscopy to Quantify Oil Recovery and Image Saturation Profiles During Cyclic CO2 Gas Injection on Carbonate Source Rocks
9:45 AM Prioritizing Multiphysics (HMTC) Controls on CO₂ Injection Behavior Using a Fully Coupled Simulator

Theme 3: Emerging Geological Evaluations: Integrated Workflows for Prospectivity Assessment and Development Efficiencies II

Exhibit Hall E, Room 4
Session Chairs: David Hume, Devon Verellen
8:55 AM Characterizing the Karst Features of the Rustler Formation and the Ochoan Evaporites in Southeast Eddy County, New Mexico
9:20 AM The Wattenberg Temperature Anomaly, Denver Basin, CO
9:45 AM Core-Based Electrofacies – Integrating Rock-Log Data for Mixed System Shelf-to-Basin Reservoir Characterization

Theme 1: Chevron Special Session: Operational Excellence at Scale

Exhibit Hall E, Room 5
Session Chairs: Alejandro Lerza, Yanli Pei
10:50 AM From Surveillance to Strategy: Calibrated Modeling and Sensitivities Unlock Optimum DJ Basin Development
11:40 AM Field Validation of Cross-Flow Ceramic Membrane Pilot for Produced Water Reuse in Completion Operations

Theme 8: Performance Prediction Methods: Physics-Based Models and Data-Driven Forecasting Approaches II

Exhibit Hall E, Station 2
Session Chairs: Alexsandra Martinez, Frank Male, Xiao Jin
8:55 AM Relationship Between the Stretched-Exponential Decline Model and Analytical Solutions for Fractal Reservoirs
9:20 AM Automated Well Performance Prediction in the Delaware Basin: Integrating Diffusive Time of Flight with Machine Learning
9:45 AM Some Pitfalls of Mass Flowing Material Balance for Fluid-In-Place Estimation

Theme 6: Subsurface Characterization, Applied Case Studies, and Business Implementation II

Exhibit Hall E, Station 1
Session Chairs: Hardik Zalavadia, Lucy Luo
8:55 AM Regional Data-Driven Model Based on Interference Metrics and Their Relationship to Parent-Child Well Productivity: A Case Study in the Vaca Muerta Basin Using Multivariate Analysis
9:20 AM Tansformers -Based Induced Earthquake Prediction in the Permian Basin and Its Impact on SWD Injection and CO2 Storage Site Evaluation
9:45 AM Fault Prediction Over a Densley Fractured, Low Offset Permian Basin Acreage: A 3D Convolutional Neural Network Case Study

Theme 9: Sustainable Water Strategies in Unconventionals

Exhibit Hall E, Room 3
Session Chairs: Swati Sagar, Qinmin Luo
10:50 AM Innovative Water Management in UAE Unconventional Resource Development: Advancing Closed-Loop Systems and Cutting-Edge Treatment Technologies
11:40 AM From Disposal to Resource: Field Deployment of a Produced Water Reuse System for Fracturing in the Middle East
12:05 PM Sustainable Unconventional Reservoirs Development in the UAE: A Water Management Case Study