page content

Afternoon Oral Presentations

Mitigating Multi-Bench Parent-Child Effects in Eagle Ford Play Using High Volume Preloads
C. Aniemena*, C. Latta, C. Chirinos, M. Moulton, A. Labryer
Tackling A Critical Challenge in Shale Development in the Delaware Basin: An Interdisciplinary Field Case Study on Subsurface Scale Diagnosis and Control and Impact on Well Performance
W. Wang*, L. DeVoe, W. Wei, P. Dechongkit, K. Ostrowicki, M. Fung, L. B. Fusilier, R. Hanna Alla, Q. Luo, E. Gallegos, A. Kostinovsky, M. Saneifar, L. Crousse, C. Yan, G. Winslow, H. Chebli
NMR Measured Dissolution of Source Rock During Brine Spontaneous Imbibition
S. Althaus*, J. Chen, Q. Sun
Results of the Analysis Applying Laboratory Magnetic Resonance and Digital Rock Physics in Unconventional Deposits of the Middle Magdalena Valley, Colombia
M. F. Segovia*, G. Davalos, E. R. Perez Carrillo, J. C. Santamaría, G. Carpio, A. Obando Yaguas, A. M. López, M. J. Robayo Niño
Antrim Shale Characterization of Organic Matter Using the Combined Techniques of Solid-type 22MHz NMR, Organic Petrography, and Pyrolysis
H. Xie*, T. Gentzis, H. Carvajal, A. Adeyilola
Seismic Anisotropic Fracture Characterization using Azimuthal Amplitude versus Angle (AVAZ) Combined with Frequency Amplitude versus Angle (FVAZ)
S. R. Mahmoud*, H. Al-Marzooqi, M. Alqaydi, A. Alharthi
Leveraging Stochastic Inversion to Increase Understanding of Drilling and Completion Hazards in the Midland Basin
D. Ellison, Z. Vera*, C. Diaz
Applying Machine Learning Technologies in the Niobrara Formation, DJ Basin, to Quickly Produce an Integrated Structural and Stratigraphic Seismic Classification Volume Calibrated to Wells
C. Laudon*, J. Qi, Y. Wang
Rejuvenate Unconventional Wells by Application of High Pression Pulse Waves in the Fracture Network – An Alternative to Refracturing Operations
C. Fensky*, Y. Fawaz, M. Perri, C. La Borderie, G. Pijaudier-Cabot, A. Jacques
Tailored Metal Oxide Nanoparticles-Based Fluids for Production Enhancement Via Engineered Uplift Pressure Mechanism: Multi-Basin Case Studies
A. Radwan*, K. Naderi, R. Ramanathan
Corrosion Inhibitor Evaluation and Selection for S&T Corrosion Control
C. Yan*, R. Young, C. Espin, W. Wei, W. Wang, D. Nix
Rapid Estimations of Dynamic Hydraulic Fracture Fronts from Cross-Well Low-Frequency Distributed Acoustic Sensing Strain-Rate Measurements
S. Leggett*, D. Zhu, D. Hill, E. Kerr
Assessing Single and Multiwell Fiber Optic Data for Microseismic Monitoring: An example from HFTS2
A. Chavarria*, G. Ugueto, Y. Oukaci, L. Laflame
Measuring Fracture Induced Stress Shadow Using Fiber Optic Sensing and Its Implications on Fracture Stimulation Design
R. Bohn*
Lithologically-Controlled Variations of the Least Principal Stress with Depth and Resultant Frac Fingerprints During Multi-Stage Hydraulic Fracturing
M. D. Zoback*
Efficient Semi-Analytical Solution of Induced Stress Change from Pressure Change in Layered Reservoirs
S. Wang, Y. Zhang*, O. Khebzegga, B. Wang, Z. Liu, X. Wen
A Coupled Model for Three-Dimensional Hydraulic Fracture Propagation and Proppant Transport
S. Kryvenko*, G. Moridis, T. Blasingame
Improving Recovery by Effectively Managing the Drawdown in the DJ Basin Unconventional Reservoirs Using an Engineered Choke Management (ECM) Strategy
M. Ramurthy*, S. Cox, S. Struna, J. Arsenault
Understanding Water Cut Trends in Permian Basin Unconventional Reservoirs and Their Relationship to Development and Production Strategies
S. Amadi*, X. xie, S. Liu, E. A. Kinzler, G. Melendez
Production Analysis and Production Forecasting in Unconventional Reservoirs Using Initial Production Data
O. Adejare*, D. Tompkins, M. Kerls
Fractional Dimension RTA in Unconventional Wells: Application in Multi-phase Analysis, History Matching, Forecasting and Interference Evaluation
B. Zanganeh*, J. Acuna
An Improved Method for GOR Forecasting in Unconventionals Using Hybrid Models
H. Zalavadia*, S. Sankaran
A Comparison of Element of Symmetry Proxy Models to Full-Well Models in Horizontal-Well Tight Gas Reservoirs
A. Small*, P. A. Bastian, G. Voneiff
An Integrated Development Optimization Platform for Well Sequencing and Unconventional Reservoir Management
J. Peng*, J. McEwen, V. Bang, E. Rayfield, L. Borden, M. Nelson
Computational Fluid Dynamics (CFD) Guided Stage Design Optimization for Hydraulic Fracturing
T. Benish, R. Brito, J. S. Brown, Y. Liu*, T. Long, M. Spiecker, D. Stojkovic, O. Kehmeyer
Using the Relationship Between Geochemical and Pressure Data to Elucidate Produced Oil Sources and Movement in the Subsurface
S. Compton*, K. Baier, J. Brand, J. Barhaugh, F. Liu, S. Stinson
Protecting our Planet One Frac at a Time
G. Norton*, J. Nieuwenhuis, M. Van Domelen, Z. West, M. Fueger
Evaluation of Shale Oil and Gas Formation Reservoir Quality Using a Multidisciplinary Workflow of Crushed Rock Core Analysis
O. Reffell, H. Xie*, J. Davidson, J. Ramoin, J. Markell
Poroelastic-Textural Characterization Through Multi-Step Hysteretic Mercury Intrusion Measurements
J. Greene*, L. Louis, G. Boitnott, C. Cox, M. McAllen
Shear Induced Matrix Damage and Micro-fracturing in Oil Shales
N. J. Welch*, M. Meng, W. Li, L. Frash, M. Wigand, J. W. Carey
An Empirical Correlation to Predict Relative Permeability in Fractured Reservoirs Considering the Stress State and the Capillary Number
L. Rueda*, K. Díez, A. Restrepo, A. Ocampo, J. Patiño, J. Rayo, D. Ayala
Geomechanical Modeling of Fracture-Induced Vertical Strain Measured by Distributed Fiber Optic Strain Sensing
A. Srinivasan*, Y. Liu, K. Wu, G. Jin, G. Moridis1, 2
Fracture Performance Evaluation from High-Resolution Distributed Strain Sensing Measurement During Production: Insights for Completion Design Optimization
W. Ma*, K. Wu, G. Jin
Minimum Horizontal Stress Sharpening; A Novel Workflow Honoring the High-Resolution Heterogeneity Seen in Unconventional Reservoirs
E. Velez Arteaga*, E. H. [email protected], A. Wray
Enhancing Well Performance and Operator Profit by Optimizing Well Completion Design - A Delaware Basin Case Study
Y. Pei*1, 2, H. Xiong
Field Measurement of the Formation Stress Depletion and the Pore Pressure Depletion in the Eagle Ford
S. Kuroda*, H. Ohtani
Improvement in the Characterization of Vaca Muerta with DFIT Type Curves Analysis
C. F. Gonzalez*, I. Arhancet
Estimating Reservoir Pressure Gradient from Stage-By-Stage Pressure Fall off Analysis in Shale Horizontal Wells
M. Ibrahim*, M. Sinkey, T. Johnston, A. M. Farid Ibrahim*, A. McMurray
Analysis of Multiple Flow/Buildup Tests Including a 5-year Buildup: Case Study of an Australian Shale Gas Well
C. Clarkson*, A. Cote
Multi Field Evaluation of T2 Pore Size Distributions and T1-T2 2D Maps
D. Veselinovic*, M. J. Dick, T. Kenney, D. Green
An Unsupervised Stochastic Machine Learning Approach for Well Log Outlier Identification
R. Akkurt*, B. Sankaranarayanan, V. Simoes, H. Maniar
Comparison of Volatiles Analysis of Cuttings from Woodford and Caney Laterals from the SCOOP Play in Oklahoma
C. M. Smith*, R. Brito, M. Smith*, J. Sinclair, P. Gordon, T. Smith*, A. Leavitt
Time Dependence of Decane Gas Condensation and Evaporation in Kerogen Isolates of an Organic Shale in the Gas Condensate Interval from HF NMR
H. Xie*, P. M. Singer, X. Wang, Y. Liu, G. J. Hirasaki, M. T. Rauschhuber, B. Sun, J. E. Burger, L. Zhou
Impacts of Well Spacing, Perforation Cluster Spacing, and Bottomhole Pressure on Stress Evolution in Unconventional Reservoirs
Y. Pei, J. He*, K. Sepehrnoori
Simulation of Downhole Temperature Distribution in Fractured Shale Gas Wells by Incorporating Geomechanics and Apparent Permeability Modeling
C. Zhong*, J. Y. Leung
An Accurate and Efficient Fracture Propagation Model Auto-calibration Workflow for Unconventional Reservoirs
C. Liu*, K. Wu, J. Wu, C. Chang, X. Yang, Y. Gong, E. Zhao, W. Yu1, 3, K. Sepehrnoori
Integrating Induced Seismicity Observations and Discrete Fracture Network Modelling to Characterize the Natural Fracture Architecture of the Montney Formation, British Columbia
S. Rogers*, S. McKean
Improved UCR Development Decision Through Probabilistic Modeling with Convolutional Neural Network (CNN)
H. Park*, Y. Tan, B. Liang
Delaware Basin Formational Solid Deposit Trends, A Data Driven Look at Developing Proactive Chemical Treatment Strategies
R. W. Hudson*, K. J. Spicka, R. W. Pagel, L. Pocha, K. Mauritsen, S. Potter, T. Hite
Application of Deep Learning Neural Networks to Petrophysical Property Prediction: Case Study from the Powder River Basin
C. A. Snow*
Combining Machine Learning and Reservoir Simulation for Robust Optimization of Completion Design and Well Location of Unconventional Wells
C. M. Calad Serrano*, P. Sarma, Y. Zhao, J. Rafiee
A New Production and Gathering Technique for Unconventional Oil and Gas Fields
Y. Fairuzov*
Effective Water Treatment in The Permian and Marcellus Shales to Mitigate Surface Equipment Failures
S. Kakadjian*, K. Korhonen, M. Solomon
Transforming Video Camera-Based Analytics into a Well Performance Indicator
S. Saha*, G. Roberts, C. Strubberg, J. McDonald
Virtual Flow Metering for Continuous Real-Time Production Monitoring of Unconventional Wells
T. Vanvik*, J. Henriksson, Z. Yang, G. Weisz